The SEPTICwatch™ monitor's proprietary, patented design uses ultrasonic transducers and an embedded microprocessor to continuously sense the positions of the floating solids, bottom solids, temperature and the liquid level within the tank. This data is then sent digitally to the Control Unit, which is located inside the customer's building.
The SEPTICwatch™ monitor provides continuous monitoring of the sludge, scum, temperature and liquid levels. At the touch of a button, it gives real-time information on actual changes as a percentage of permissible floating solids, bottom solids and total solids. It also provides the immediate status of the liquid level within the tank in inches. Using the monitor's programmable Control Unit, the tank's optimum level for pumping is set, so the tank can be pumped when it's actually needed. The monitor's Control Unit can also be programmed to warn of dangerously high solid levels and lower than normal/higher than normal liquid levels - emergency conditions that could indicate system problems berfore tye get out of control.
Provides Historical Data for Effective Long Term Management
Because the Control Unit keeps an ongoing record of tank measurements, the monitor can be used to effectively manage the owner's septic system now and over time. Trends can be tracked by looking at past data, either at the customer's location or remotely via the monitor's modem connection. Problem systems can be identified and repaired or upgrades completed before failure occurs.
|
